Click on Image to Zoom In

FilmTec™ SW30XLE-440i WET

In stock
Only %1 left
SKU
DWNA-FILMTECSW30XLE440IWET
$707.00
    FILMTEC™ SW30XLE–440i Elements offer medium-salinity and medium-temperature feed waters an advanced combination of high productivity and high rejection through extra-low energy consumption and single-pass design. It is also an excellent choice for two-pass seawater designs or high salinity brackish water applications. The combination of high active area and thick feed spacer of the FILMTEC™ membranes facilitates high productivity and low cleaning frequency which enable sustainable low lifecycle cost. Benefits of the FILMTEC™ SW30XLE–440i element include: l High active area of 440 ft2 (41 m2) permits low system capital cost by maximizing productivity and enables accurate and predictable system design and operating flux. l The combination of high active area with thick feed spacer (28 mil) allows low cleaning frequency and high cleaning efficiency. l Utilization of the distinct iLEC™ Interlocking Endcaps helps reduce system operating costs and reduce the risk of O ring leaks that can cause poor water quality (see Form No. 609 00446 for information on the cost-saving benefits). l Sustainable high performance over the operating lifetime, because oxidative treatments are not used in membrane production. This is one reason FILMTEC™ elements are more durable and may be cleaned more effectively over a wider pH range (1 – 13) than most other RO elements, which use oxidative treatments. l Effective use in permeate staged seawater desalination systems without impairing the performance of the downstream stage.

Buy more & Save more

Contact us to discuss volume pricing
More Information
Diameter (in) 8.0
Stabilized Salt Rejection (%) 99.8
Permeate Flow (GPD) 9900
Length (in) 40.0
Min/Max cleaning pH 1-13
Membrane Type Seawater
Max dP (psi) 15.0
Active Area (ft2) 440
Application Drinking Water, High Salinity Brackish Water